24
bit 96 khz tube analog class A front loading cd player.
T
R U E TUBE CD-PLAYER
Lector proudly
introduces the all new CDP-0.6 cd-player with tube
analog output featuring original cdm servo with proprietary software control,proprietary
DAC chipset and D.S.P. resampling solution. Audio analog output is based on pure
direct dac connection as two double
triode on class A configuration circuit (ECC-81, 12AT7)
From
digital chipset DAC pin to output pin the signal analog domain don't have any
transistor or IC on signal path: only true genuine premium tube circuit.
Only premium grade polipropylene capacitors are used on signal path.
This
feature it's realy important, so the fragile analog signal don't suffering of
typical solid state integrated circuit sound.
The analog output
section uses selected
2 double triodes
in pure class A ( 2 tubes ECC-81 or 12AT7) .
Tubes are selected for lowest noise and tuning trimmered for precision
tracking voltage output.
Accurate digital clock circuit generator supply right and stable frequency
at very low jitter to digital demodulator ic circuit, so the serial three wire
signal drive easy the digital to analog converter chip.
The
chip DAC is a special custom made components manufacture for Lector only as also
the 70 watt power toroidal transformer.
Sonic performance
delivers pure enjoyment: thanks to original design and custom made components as
servo drive pcb, original firmware,extensive mod's around laser pick up. What you listen is just the
sound of your favourite tubes operating with exceptional linearity in a class A
gain stage.
We can spend many
words trying to describe its purity, its great dynamics, its airy soundstage,
its accurate imaging, its ability to resolve the subtle details and many other
outstanding qualities of this cd-player. But we prefer to simply invite you
to listen to it and to trust more what your hear.
S
P E C I F I C A T I O N :
|
E L E C T R I C A L
P E R F O R M A N C E
|
Unit description:
|
Stereo tube line level preamplifier with 5 inputs,2
main outputs, passive volume out, tape out, htd output
|
Tube active circuit:
|
6H30II, by
SATC
circuit: 6922/12AT7/12AU7/6CG7/12BH7
|
Frequency response:
|
20-50.000 Hz +/- 1 db
|
THD distorsion:
|
Less of 0.1 %
|
Input sensibility and gain:
|
200 mV / 20 db gain / 50 kohm input
|
Output voltage and impedance:
|
20 Volt @ 250 ohm
|
Optional:
|
Remote control handset,cherry wood veenerede side
panels
|
Power supply main:
|
100V/120V/230V ac 70 V/A
|
Dimension, weight (net):
|
400 (L) x 110 (H) x 300 (D)
Kg.10
|
E L E C T R I C A L
P E R F O R M A N C E
|
Unit description:
|
Stereo tube line level preamplifier with 5 inputs,2
main outputs, passive volume out, tape out, htd output
|
Tube active circuit:
|
6H30II, by
SATC
circuit: 6922/12AT7/12AU7/6CG7/12BH7
|
Frequency response:
|
20-50.000 Hz +/- 1 db
|
THD distorsion:
|
Less of 0.1 %
|
Input sensibility and gain:
|
200 mV / 20 db gain / 50 kohm input
|
Output voltage and impedance:
|
20 Volt @ 250 ohm
|
Optional:
|
Remote control handset,cherry wood veenerede side
panels
|
Power supply main:
|
100V/120V/230V ac 70 V/A
|
Dimension, weight (net):
|
400 (L) x 110 (H) x 300 (D)
Kg.10
|
Type
off unit:
|
Integrated
CD Player with tube out filter and dsp sample rate converter for 96 khz |
Harmonic
distorsion
THD: |
Better
than 0.1 %
|
DAC
type and filter: |
24
bit with DSP sample rate converter by Lector proprietary software |
Signal
to
noise
ratio: |
100
db (A) |
Tube
for
preamplification
stage: |
2
x
ECC-81
– 12 AT 7 selected by Lector during testing
|
Frequency
response: |
20
- 22 K h z
+/- 1.5 db
|
Digital
outputs: |
Optional:
SPDIF/OPTO Toslink or ST-II/AES-EBU
balanced by XLR |
Analog
line outputs: |
1
one pair RCA at 2.3 mV 250 ohm |
External
power
supply: |
100/110/230/240
Vac
50/60 Hz
70 V/a |
External
dimension: |
400
x 308 x 85 ( L x P x H) mm |
Weight: |
7
Kg
net
8 Kg
gross |
Accessories
supply:
|
Power
cable mains / manual instruction/
Remote control handset
|
|
|
|
|
Download more info:
at top right of this page |
|